Your Cart is Empty
NEC-2000
€4.096,00
NEC-2000 is built as a compact water treatment system for swimming pools or supply tanks with water volumes up to 40 cubic meters and for water flows up to 3 cubic meters per hour.
Like its big sister model, the NEC-4000, the NEC-2000 is characterized by a number of key features…
- precise control of electrode efficiency
- high voltage to the electrode
- rated for water pressures up to 16 bar
- WRAS certified treatment cell coating
(i.e. suitable for drinking water)
Technical data
- Power supply: integrated switchable 85-264 VAC, maximum electrode voltage 24 volts VDC; 50/60 Hertz
- Connection to power source via supplied European power cord with IEC-60320-C7 ("figure 8") connector into the IEC-60320-C8 socket built into the unit
- Required power: max. 36 watts depending on preset efficiency and water conductivity
- Operational controls:
- BCD selector to adjust the electrode efficiency in steps of 0.16 A (max. 1.5 A)
- BCD selector to adjust the electrode operation time (0.5 h to 4 hours; continuous operation)
- ON/OFF button to start the operation and abort; the use of a timer is recommended (not included in the scope of delivery)
- IP rating: IP54 (protection against splashing water)
- Measurements: 200 x 215 x 115 mm
- Empty weight: 4.2 kg
- Electrode weight: 2.3 kg standard composed of 5 plates of 5 mm each
- Connections: 2x 2 inch BSP internal thread
English description
NEC-2000 is designed as a compact-size water treatment system for flow rates of up to 3 cubic meters per hour respectively for the treatment of swimming pools or supply tanks with water volumes of up to 40 cubic meters. Just as its larger sister, the NEC-4000, the NEC-2000 is characterized by a number of key features…
- precise control of the electrode performance
- enhanced electrode triggering for reliable performance even with soft water
- rated for water pressures up to 16 bar
- WRAS-certified (ie drinking water suitable) coating of the treatment cell
Technical Data
- Power supply:
- Integrated wide-range power supply: 85-264 VAC, output max. 24VDC
- Frequency range: 50/60 Hertz
- Connection to power source via supplied Euro power cable with IEC-60320-C7 ("figure of 8") plug to unit's built-in IEC-60320-C8 socket
- Power rating: max. 36 Watt depending on pre-set performance and water conductivity
- Operating controls:
- BCD switch for setting electrode performance in 0.16 A steps (max. 1.5 A)
- BCD switch for setting electrode runtime (0.5 h to 4 hours; continuous operation)
- ON/OFF push-button for runtime start and abortion; timer recommended (not included in scope of delivery).
- IP rating: IP54 (splash-water protection)
- Dimensions: 200 x 215 x 115 mm
- Empty weight: 4.2kg
- Electrode weight: 2.3 kg (for electrode cartridges made up of 5 plates each 5 mm)
- Connections: 2x 2-inch BSP internal threads